HEATSTRIP® Classic Outdoor Radiant Electric Heater
Classic and functional in every way, the HEATSTRIP® Classic Outdoor Radiant Electric Heater is a timeless solution to heating indoors and outdoors.
- The electric radiant heater can be used in protected alfresco areas right through to hard to heat indoor areas
- The unobtrusive design of the black heater affords the user flexibility in placement
- Enjoy cost-effective and efficient heating and gentle warmth
- Protection against corrosion, designed for toughest environments
- DIY installation is easy with 2 models and flexible mounting options
- 2-year warranty for residential and 1-year warranty for commercial
- Engineered and designed in Australia
- Minimum mounting height (including flush mount) 2.1m
- Ideal mounting height (including flush mount) 2.2m – 2.5m
- Maximum mounting height (including flush mount) 2.7
The mounting height of the electric heater can have a significant impact on performance. For mounting heights higher than the ideal range, we recommend the use of wires/chains or optional extension poles to reduce the height and ensure the heater is within the ideal range. Heater performance may be affected if outside this range.
For the majority of outdoor applications, the most effective method is to spot heat a table or similar area. The below diagrams provides an easy selection guide for the approximate model and quantity of heaters required to heat common residential table settings. Selections are based on HEATSTRIP® Classic being mounted at 2.4m from the floor in an undercover fully enclosed outdoor area.
General recommendations for HEATSTRIP® Classic:
Ideal mounting location: ceiling mounted, directly above area to be heated (eg. above a table), but can also be mounted on a wall and angled downwards. • Protection from winds by café blinds, screens etc. is highly recommended.
The below table outlines the coverage of each Heatstrip® Classic model (in m2), based on 3 different scenarios. For example, for an outdoor area that is protected from prevailing winds by walls, café blinds etc, Model THH 1500A will cover 3m2 and Model THH2400A will cover 4.8m2.
|MODEL||INDOOR PROTECTED (m2)||OUTDOOR ENCLOSED (m2)||OUTDOOR EXPOSED (m2)|
Stylish, slimline design with a sleek black front profile
Easy DIY installation for 2 models with multiple mounting options
Perfect for indoor and protected outdoor applications, including alfresco areas
|MODEL||POWER (Watts)||CURRENT (Amps)||DIMENSIONS (mm)||WEIGHT (kg)||LEAD LENGTH (mm)||PLUG|
|THH 1800A||1800||7.5||1104 x 165 x 48||6||1000||YES|
|THH 2400A||2400||10||1364 x 165 x 48||7||1000||YES|
|THH 3200A||3200||13.3||1774 x 165 x 48||9||1000||NO|
|RH180||1800||7.5||1105 x 165 x 48||6||1000||YES|
The installation of HEATSTRIP® Classic is simple and easy with the standard mounting brackets supplied. For other locations, there are a range of mounting options available – (refer to below diagrams). The HEATSTRIP® Classic can be mounted directly to the ceiling; angled downwards on a wall; fitted flush with the ceiling; suspended on chains or poles; attached to beams/poles/umbrella’s; mounted end-to-end, or 2 units together.
(Flush Mount for THH1800A)
(Flush Mount for THH2400A)
(Flush Mount for THH3200A)
Set of 300mm Chrome
Set of 600mm Chrome
Set of 900mm Chrome
Set of 1200mm Chrome
Standard Mounting Brackets Kit