HEATSTRIP® Nano Radiant Electric Wall Mounted Heater
Model THN2000, 2000Watts The HEATSTRIP® Nano is a small but powerful entry-level heater that is suitable for both wall and ceiling mounts. The smart electric infrared design makes spot heating quick and consistent for indoor and outdoor use. Convenient timer control and easy installation make the HEATSTRIP® Nano a favourite for residential and commercial use.
- Convenient DIY installation from ceiling or wall, with mount brackets included/li>
- 4 heat settings controlled by remote, with 24-hour timer & LED display
- Renowned heat performance from a state of the art infra-red heating elements
- Spot heating in outdoor and indoor applications including cafes, offices, garages, bathrooms and any alfresco setting
- 8-month warranty for residential and 12-month warranty for commercial
- Minimum mounting height 1.8m
- Ideal mounting height 2.1m – 2.3m
- Maximum mounting height 2.5 outdoors / 2.7 indoors
The HEATSTRIP® Nano is perfect for any location, although heat performance will be impacted if the mounting height exceeds the optimal range. For high ceilings, HEATSTRIP® recommends the use of wires, chains and poles to reduce the height of the heater. Heaters placed outside of this range will not be as fast-acting or consistent in coverage.
General recommendations for HEATSTRIP® Nano:
For the majority of outdoor applications the most effective method is to spot heat a table or similar area. The below diagrams provides an easy selection guide for the approximate model and quantity of heaters required to heat common residential table settings. Selections are based on HEATSTRIP® Nano being mounted at 2.4m from the floor in an undercover fully enclosed outdoor area.
|MODEL||INDOOR PROTECTED (m2)||OUTDOOR ENCLOSED SPOT HEATING (m2)|
Remote control operation, with 4 heat settings and 24 hour timer & LED display
Carbon filament infra-red heating element provides high performance instant heat
Perfect for indoor and protected outdoor applications, including alfresco areas
|MODEL||RUNNING COST||POWER (Watts)||CURRENT (Amps)||DIMENSIONS (mm)||WEIGHT (kg)||LEAD LENGTH (mm)||PLUG|
|THN2000||50c/hr||2000||8.3||900 x 130 x 89.5||3||2000||YES|
Included with the HEATSTRIP® Nano infrared electric heaters, to provide flexibility, ease of use and reduce operating costs.
The installation of HEATSTRIP® Nano is simple and easy with the standard mounting brackets supplied. For other locations, there are a range of mounting options available – (refer to below diagrams). The HEATSTRIP® Nano can be mounted directly to the ceiling; angled downwards on a wall; fitted flush with the ceiling; suspended on chains or poles; attached to beams/poles/umbrella’s; mounted end-to-end, or 2 units together.